Description
- PON interface
- 1 EPON port: (PX20+)
- Wavelength:Tx1310nm,Rx 1490nm
- SC/UPC connector
- Receiving saturation: ≥-8dBm
- Receiving sensitivity: ≤-28dBm
- Transmitting optical power: 0~+4dBm
- Transmission distance: 20KM
LAN interface
- 1 x 10/100/1000Mbps auto adaptive Ethernet interfaces.10/100/1000M Full/Half, RJ45 connector
- LED: 3, For Status of REG、SYS、LINK/ACT
Operating condition
- Temperature: -30℃~+70℃
- Humidity: 10%~90%(non-condensing)
Storing ondition
- Temperature: -30℃~+70℃
- Humidity:10%~90%(non-condensing)
- Power supply: DC 12V/0.5A
- Power consumption: ≤4W
- Dimension: 82mm×82mm×25mm(L×W×H)
- Net weight: 85g
Basic
- Support MPCP discover & register
- Support authentication Mac/Loid/Mac + Loid
- Support Triple Churning
- Support DBA bandwidth
- Support auto-detecting, auto-configuration, and auto firmware upgrade
- Support authentication SN/Psw/Loid/Loid+Psw
Alarm
- Support Dying Gasp
- Support Port Loop Detect
- Support Eth Port Los
LAN
- Support Port rate limiting
- Support Loop detection
- Support Flow control
- Support Storm control
VLAN
- Support VLAN tag mode
- Support VLAN transparent mode
- Support VLAN trunk mode(max 8 vlans)
- Support VLAN 1:1 translation mode(max 8 vlans)
- Auto VLAN detection
Multicast
- Support IGMPv1/v2
- Support IGMP Snooping
- Max Multicast vlan 8
- Max Multicast Group 64
QoS
- Support 4 queues
- Support SP and WRR
- Support 802.1P
L3
- Support IPv4
- Support DHCP/PPPOE/Static IP
- Support Static route
- Support NAT
Management:
- Support CTC OAM 2.0 and 2.1
- Support ITUT984.x OMCI
- Support WEB
- Support TELNET
- Support CLI
Throughput
- Upstream >900Mbps
- Downstream >960Mbps
Reviews
There are no reviews yet.