Description
- Network port: 24 10/100/1000Mbps RJ45 port(port1~port24), 4 1000Mbps SFP port
- Forwarding rate : Gigabit wire-speed forwarding
- Transmission rate: 10BASE-T or 100BASE-TX, 1000BASE-TX, 1000BASE-X
- Network protocol/standard : IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-TX, IEEE 802.3x Flow Control
- Performance: Bandwidth:52Gbps (non- blocking) Network latency(100 to 100Mbps) Max 20 microseconds Network latency(1000 to 1000Mbps) Max 10 microseconds Frame filtering and transmission rate, 10M 14,800pps 100M 148,809pps, 1000M 148,8019pps
- LEDs indicator: Power indicator SYS, LINK/ACT indicator
- Power: 12V/2.1A
- Environment: Working temperature : 0°C~55°C, Operating Humidity: 10%~90%(Non-condensing) EMC : CE Class B, FCC Part 15, Class B, VCCI Class B, C-Tick
- Certifications: CE/ROHS/FCC/CCC
- Warranty: 1 Year
- Port Management (Ports): Enables / disables the port, Speed,duplex, MTU settings flow-control , Port Information View
- Port mirroring: Support port access direction
- Port speed limit: Supports port speed limit, speed-granularity determined by the chip
- Port isolation: Support port isolation settings
- Storm suppression: Supports unknown unicast, unknown multicast, broadcast storm suppression
- Link aggregation: “Supports static manual aggregation Support LACP dynamic aggregation
- VLAN: Access, Trunk, Hybrid, Translate, Support port VLAN base on port, protocol, MAC Support GVRP dynamic VLAN registration, Voice VLAN
- MAC: Support static add and delete, MAC address learning limit Support dynamic aging time setting
- Spanning Tree: Support 802.1d (STP), Support 802.1w (RSTP), Support 802.1s (MSTP)
- IGMP-snooping: Support static add and delete, Support v1 / 2/3 dynamic multicast listening
- ACL: Based on the source MAC address, destination MAC address, protocol type, source IP address, destination IP address, and L4 port number
- QOS: “802.1p(COS), DSCP, Based on the source IP, destination IP, port number classification, Support SP, WRR, DRR scheduling policy, Support CAR
- LLDP: Support LLDP link discovery protocol
- User Settings: Add / Remove Users
- Log: User login, operation, status, event log
- 802.1x: Support 802.1x port authentication (Radius, local)
- Anti-attack: DOS defense,Support CPU protection and limit the rate of sending packets to the CPU, ARP binding (IP, MAC, PORT binding)
- Network diagnostics: Support ping, telnet, trace
- System Management: “Device reset, configuration save / restore, upgrade management, time setting and so on
- CLI: Support serial port command line management
- TELNET: Support telnet remote management
- WEB: Support layer 2 setting
- DHCP: DHCP Snooping
- Ring network protection: STP RSTP ERPS
- SNMP: Support V1 V2 V3
- L3: Support Route Configuration, Interface Configuration ARP Configuration, VRRP Configuration, Static Configuration, RIP Configuration,OSPF Configuration
Reviews
There are no reviews yet.