ssd-drive

M.2 SATA Solid State Drive

- - Description : M.2 SATA Solid State Drive
  - Model No : S1-OM2-128 | S1-OM2-256 | S1-OM2-512 | S1-OM2-1TB
  Key Features:
  - Capacity: 128GB, 256GB, 512GB, 1TB
  - Form Factor: 80mm M.2 (80mm SATA B Key)
  - Reliable QLC, TLC and MLC NAND type flash
  - Electrically fully complied with the SATA -II/SATA -III standards
  - Complied with the slot B primary key SSD SATA pin out
  - Modules with the “B” and “M” key for ultimate performance SSD or cache
  - Data retention: JESD47 compliant
  - S.M.A.R.T. command transport (SCT) technology
  - Enhanced endurance by dynamic/static wear-leveling
  - Hardware LDPC ECC engine
  - Data integrity under power-cycling
  - Spec meet Next Generation Form Factor (NGFF -xx-B-M)
  - 100% tested HW and SW

Category: STORAGE

Download pdf

Description
Reviews (0)

Description

- System Requirements
  - Operating System: Supported by all operating systems
  - Operating Voltage Req: Vcc = 3.3V +/-5%
  - Interface: SATA 6.0Gbps (SATA‐III) or SATA 3.0Gbps (SATA‐II) or SATA 1.5Gbps
  Physical Specifications
  - Length: 80.0 ± 0.2 mm
  - Width: 22.0± 0.2 mm
  - Thickness: 2.20 ± 0.15 mm
  - Weight: <7.0g
  Data Transfer Speed (R / W)
  - Seq. Read / Write: 530* MB/s / 515* MB/s (128GB, 256GB, 512GB, 1TB)
  Performance Specifications
  - Access Time: 0.2 ms
  - Seek Time: 0 ms
  - Mount Time: Dependent on system HW and SW
  - Power on to Ready: Dependent on system HW and SW
  - Data Transfer Time: Rated Data Transfer Speeds are maximums based on Crystal Disk Mark 6.0
  Environmental Specifications
  - Operating Temperature: Commercial Grade: 0°C to +70°C, Industrial Grade: -40°C to +85°C
  - Humidity: 5% to ~98% RH
  - Operating Shock: 1500G
  - Operating Vibration: 16G
  - Operating Altitude: TBD

Reviews

There are no reviews yet.

Be the first to review “M.2 SATA Solid State Drive”