S-EP200

• PON Interface: 1 EPON optical interface, Meet 1000BASE-PX20+ standard Symmetric1.25Gbpsupstream/downstream, SC single- mode fiber Split ratio:1:64,Transmission distance 20KM.
• User EthernetInterface: 1*10/100M auto-negotiation, 1*10/100/1000M auto-negotiation Full/half duplex mode, RJ45 connector, Auto MDI/MDI-X, 100m distance
• Power Interface:12V DC Power supply

Performance Parameters:-

• PON Optical Parameter: Wavelength: Tx 1310nm, Rx1490nm, Tx Optical Power: -1~ 4dBm Rx Sensitivity: -25dBm, Saturation Optical Power: -3dBm Connector Type: SC, Optical Fiber: 9/125?m single-mode fiber
• Data Transmission: Data Transmission Parameter, PON Throughput: Downstream 950Mbps; Upstream 930Mbps Ethernet: 100Mbps, 1000Mbps, Packet Loss Ratio:<1*10E-12 latency: <1.5ms
• Business Capability: Layer 2 wire speed switching, Support VLAN TAG/UNTAG, VLAN conversion, Support Port-based speed limitation Support Priority classification, Support storm control of broadcast.

Network Management:-

• Management Mode: Support IEEE802.3 QAM, ONU can be remotely managed by OLT Support Remote management through SNMP and Telnet Local management.
• Management Function: Status monitor, Configuration management, Alarm management, Log management.

Indicator:-

• LED Indicator: PWR: Power up or down, SYS: System instructions
• OPTIN: Optical Link Status, LINK: ONU Registered
• LAN: Link Status of Ethernet Interface

Physical Features:-

• Shell:  Plastic casing
• Power: External 12V 0.5A AC/DC power supply adapter
• Power consumption: <2W(),<2.3W(PL311HC)
• Environmental Specifications: 
• Operating temperature: -10 to 60 ºC
• Storage temperature: -40 to 70 ºC
• Operating humidity:10% to 90% (Non-condensing)
• Storage humidity: 10% to 90% (Non-condensing)